Description

JCB HAMMERMASTER 70 (OWNER MANUAL)

About this Handbook

This document details the relevant use and maintenance procedures for the JCB Hammermaster 70. The safety information included is directly relevant to operation and maintenance of the Hammermaster 70. General safety information, and that relevant to the carrier machine is not included. For details about safe operation of the carrier machine, see the relevant documents.

DO NOT ATTEMPT TO INSTALL, OPERATE OR MAINTAIN ANY ATTACHMENT UNTIL YOU HAVE READ AND UNDERSTOOD ALL RELEVANT OPERATOR DOCUMENTATION FOR BOTH THE ATTACHMENT, AND THE CARRIER MACHINE. PAY PARTICULAR ATTENTION TO SAFETY INFORMATION. YOU MUST OBSERVE ALL RELEVANT LAWS AND REGULATIONS.

The manufacturer’s policy is one of continuous improvement. The right to change the specification of the machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur between specifications of the machine and the descriptions contained in this publication.

Units of Measurement

In this handbook for the JCB Hammermaster 70, the S.I. system of units is used. For example, liquid capacities are given in litres. The imperial units fellow in parenthesis ( ), for example 28 litres (6 UK gal).

Warranty

A copy of the manufacturer’s warranty is provided at the rear of this handbook. We advise you to read and understand the warranty before using the machine.

Carrier Machine Suitability

The JCB Hammermaster 70 is suitable for use with the JCB 801 Series Mini Excavators when fitted with a high flow auxiliary/Breaker hydraulic circuit. The Hammermaster 70 is suitable for use with some other non JCB carrier machines. See the specificationn section for details of typical carrier requirements.

Check List – Equipment

The Hammermaster 70 is supplied as follows:
1 Breaker – assembled with mounting side plates.
2 Tail Hoses – assembled with quick release couplings.
3 Moil Tool (option)
4 Chisel Tool (option)
5 Grease Gun
6 JCB Special Hammer Grease Cartridge
7 Noise Warning Decal (self adhesive)
8 Operator and Service Handbook.

Find more manuals for JCB Industrial machines here.

Link to JCB Construction website is here.