JCB HYDRAULIC BREAKERS (OPERATION MANUAL)

$30.00

OPERATION MANUAL FOR JCB HYDRAULIC BREAKERS.

PN: 9800/9004-15.

Language: English.

Total Pages: 24.

Compare
SKU: 9800/9004-15 Category: Tags: ,

Share this product

Description

JCB HYDRAULIC BREAKERS (OPERATION MANUAL)

To operate the range of JCB hydraulic breakers efficiently and safely you must know the breaker and have the skill to use it. You must also be a competent operator of the machine supplying the breaker with hydraulic power. If you are a new operator, you should become trained in the skills of using a hydraulic breaker before trying to work with it.
It is assumed that personnel carrying out maintenance have at least a sound knowledge of workshop practice, safety procedures and general techniques associated with the repair of hydraulic equipment.
It is expected that components will be thoroughly cleaned and lubricated, where appropriate, also that any opened hose connections will be blanked to prevent entry of dirt and excessive loss of hydraulic fluid.

About this manual

The following JCB hydraulic breakers are covered by this handbook:
– HM25 LV Low Vibration breaker
– Vibro-damped handle breaker
– ‘D’ handle breaker
– ‘T’ handle breaker.

Connecting the Hydraulic Hoses

1 Make the machine safe. Refer to Routine Maintenance, Prepare the Machine for Maintenance.
2 Vent the hydraulic system. Refer to Routine Maintenance, Releasing the Hydraulic Pressure.
3 If necessary, remove the blanking caps.
4 Check the hoses and adaptors for damage. Refer to Routine Maintenance, Checking for Damage.
5 Connect the hoses.
6 Check for leaks.

Disconnecting the Hydraulic Hoses

1 Make the machine safe. Refer to Routine Maintenance, Prepare the Machine for Maintenance.
2 Vent the hydraulic system. Refer to Routine Maintenance, Releasing the Hydraulic Pressure.
3 Disconnect the hoses. If the hoses have quick releases couplings, then refer to Quick Release Couplings.
4 Check the hoses and adaptors for damage. Refer to Routine Maintenance, Checking for Damage.
5 If necessary, install the blanking caps
6 Check for leaks.
a Start the engine.
b Operate the related control to increase the pressure in the hydraulic system.
c Stop the engine then remove the starter key.
d Check for indications of leakage at the hose connections. Correct, as necessary.

Find more manuals for JCB Industrial machines here.

Link to JCB Construction website is here.

Reviews

There are no reviews yet.

Be the first to review “JCB HYDRAULIC BREAKERS (OPERATION MANUAL)”

Your email address will not be published.