Description

JCB TRENCHER XR SERIES (OWNERS MANUAL)

Installing

1 Align the JCB TRENCHER square to the attachment.

2 Lower the loader arm fully to bring the hitch plate A below the level of the lips on the attachment. Make sure the hitch locking mechanism is unlocked as detailed in the machine operators manual.

3 Drive the machine slowly forward. Stop when the hitch plate A just touches the attachment.

4 Raise the loader arm and engage the hitch plate A in the lips on the attachment. Stop the movement as soon as the plate is engaged.

5 Fully roll back the attachment.

6 Disable the hydraulic function of the machine, turn off the engine and apply the park brake as detailed in the machine operators manual.

7 Lock the attachment onto the hitch as detailed in the machine operators manual.

8 The attachment is now locked onto the Quickhitch.

9 Connect the attachment tail hoses to the appropriate auxiliary circuit pipework, (check machine Operator Manual for correct procedure).

10 Return to the machine make sure all persons are clear of the machine and attachment, start up the machine as detailed in the operators manual.

Non-JCB Carriers

For Non-JCB carriers reference should be made to the trenchers mechanical and hydraulic specifications. Refer to the carriers Owners Manual for instructions on installing and removing attachments. However the following general points should be observed.

1 Position the JCB TRENCHER on firm, flat ground.
2 Make the carrier safe, e.g. parking brake engaged, engine stopped, hydraulic pressure released.
3 Use adequate lifting equipment.

Find more manuals for JCB Industrial machines here.

Link to JCB Construction website is here.